- 0755-21675210
- acdrive@micno.com.cn
Ke300a - 10 série de machines de traction à double fréquence, les machines de traction automatique à commande numérique par rapport aux systèmes traditionnels de commande de traction,Le métier à étirer répond rapidement à la conception de la fonction PID, éliminant les procédés de commande qui nécessitaient auparavant la connexion d 'un contrôleur PID externe, ce qui permet de suivre automatiquement et d' ajuster rapidement la vitesse d 'enroulement en fonction de l' évolution du diamètre de la roue d 'enroulement et de la cohérence.L 'élément de programme augmente certaines fonctions spécifiques de la machine à étirer (suppression de courant, suppression de tension, suppression de tremblement, etc.) en fonction des caractéristiques de l' application de la machine à étirer.L 'utilisateur n' a pas besoin de paramètres trop complexes pour l 'utiliser.Il suffit de modifier les paramètres en fonction du lieu d'utilisation effectif.
(1) DSP système de commande à grande vitesse
noyau de contrôle utilisant la production d 'instruments Texas DSP processeur numérique à grande vitesse.Le système assure une haute vitesse et une haute stabilité.Il peut traiter complètement les opérations de commande les plus complexes.12 345 667 890 (2) La nouvelle technique de commande de vecteur sans PG, 1234 567 890, permet de commander un mouvement interrompu sans vecteur PG, avec un couple nominal pouvant atteindre 150% à 05hz; contribue à réduire la sensibilité aux paramètres du moteur et à améliorer l 'adaptabilité du site.Il peut également S' appliquer à la commande d 'enroulement, solution parfaite pour faire glisser plusieurs moteurs sur la même charge.
3) Caractéristiques des excavateurs
4) temps de réponse dynamique rapide sous contrôle vectoriel
PG inférieur à 20ms.
Item | Technical Index | Specification |
Input | Input voltage | 1AC 220V±15%,3AC 380V±15% |
Input frequency | 47~63Hz | |
Output | Output voltage | 0～rated input voltage |
Output frequency | V/f control: 0~3000Hz Sensorless vector control: 0~300Hz | |
Operation command mode | Keypad control Terminal control Serial communication control | |
Frequency setting mode | Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes. | |
Overload capacity | G model: 150% 60s, 180% 10s, 200% 3s P model: 120% 60s, 150% 10s, 180% 3s | |
Starting torque | 0.5Hz/150% (SVC); 1Hz/150% (V/f) | |
Speed adjustment range | 1:100 (SVC), 1:50 (V/f) | |
Carrier frequency | 1.0-16.0kHz，automatically adjusted according to temperature and load characteristics | |
Frequency accuracy | Digital setting: 0.01HzAnalog setting: maximum frequency * 0.05% | |
Torque boost | Automatically torque boost; manually torque boost: 0.1%~30.0% | |
V/f curve | Three types: linear, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square) | |
Acceleration/decele ration mode | Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.1s~3600.0s | |
DC braking | DC braking when starting and stopping DC braking frequency: 0.0Hz~maximum frequency, braking time: 0.0s~100.0s | |
Jog operation | Jog operation frequency: 0.0Hz~maximum frequency Jog acceleration/deceleration time: 0.1s~3600.0s | |
Simple PLC & multi-step speed operation | It can realize a maximum of 16 segments speed running via the built-in PLC or control terminal. | |
Built-in PID | Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.) | |
Automatic voltage regulation | Keep output voltage constant automatically when input voltage fluctuating | |
Control Function | Common DC bus | Common DC bus for several inverters, energy balanced automatically |
Torque control | Torque control without PG | |
Torque limit | “Rooter” characteristics, limit the torque automatically and prevent frequent over-current tripping during the running process | |
Wobble frequency control | Multiple triangular-wave frequency control, special for textile | |
Timing/length/counting control | Timing/length/counting control function | |
Over-voltage & over-current stall control | Limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping | |
Fault protection function | Up to 30 fault protections including over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure & has fault automatic reset function | |
Input/output terminals | Input terminals | Programmable DI: 7 on-off inputs, 1 high-speed pulse input 2 programmable AI: AI1: 0～10V or 0/4～20mA A12: 0～10V or 0/4～20mA |
Output terminals | 1 programmable open collector output: 1 analog output (open collector output or high-speed pulse output) 2 relay output 2 analog output: 0/4~20mA or 0~10V | |
Communication terminals | Offer RS485 communication interface, support MODBUS-RTU communication protocol | |
Human machine interface | LED display | Display frequency setting, output frequency, output voltage, output current, etc. |
Multifunction key | QUICK/JOG key, can be used as multifunction key | |
Environment | Ambient temperature | -10℃～40℃, derated 4% when the temperature rise by every 1℃(40℃～50℃). |
Humidity | 90%RH or less (non-condensing) | |
Altitude | ≤1000M: output rated power, ＞1000M: output derated | |
Storage temperatu (1) DSP high-speed control core The control core adopts the high-speed digital processor DSP produced by TI (Texas Instruments). Ensure the system has strong performance with high speed and stability features. It can completely deal with the most complex control operations. (2) New No PG vector control technology No PG vector control can block the motion, the rated torque can up to 150% when it is 0.5Hz ; It can help to reduce the sensitivity to motor parameters and improve the adaptability at the site. It also can be applied to winding control, That's a perfect solution for multiple motors drag the same load. (3) Characteristics of "excavator" (4) Fast dynamic response The dynamic response time under PG vector control is less than 20ms. (5) Fast current limiting function (6) Accurate parameter identification ability (7) High torque control accuracy re | -20℃～60℃ | |
Storage environment | Indoor, no direct sunlight, dust, corrosive gas, flammable gas, oil mist, steam, dripping water, salt, vibration |
Inverter Model | Motor | Rated Input Current (A) | Rated Output Current (A) | |
KW | HP | |||
1AC 220V/230V/240V -15%~15% | ||||
KE300A-10-0R4G-S2 | 0.4 | 0.5 | 5.4 | 2.3 |
KE300A-10-0R7G-S2 | 0.75 | 1.0 | 8.2 | 4.0 |
KE300A-10-1R5G-S2 | 1.5 | 2.0 | 14.0 | 7.0 |
KE300A-10-2R2G-S2 | 2.2 | 3.0 | 23.0 | 9.6 |
KE300A-10-004G-S2 | 4.0 | 5.2 | 25.0 | 15.0 |
KE300A-10-5R5G-S2 | 5.5 | 7.2 | 38.0 | 23.0 |
KE300A-10-7R5G-S2 | 7.5 | 10.0 | 50.0 | 32.0 |
3AC 380V/400V/415V -15%~15% | ||||
KE300A-10-0R7G/1R5P-T4 | 0.75/1.5 | 1/2 | 3.4/5.0 | 2.1/3.8 |
KE300A-10-1R5G/2R2P-T4 | 1.5/2.2 | 2/3 | 5.0/6.8 | 3.8/6 |
KE300A-10-2R2G/004P-T4 | 2.2/4.0 | 3/5 | 6.8/10 | 6/9 |
KE300A-10-004G/5R5P-T4 | 4.0/5.5 | 5/7.5 | 10/15 | 9/13 |
KE300A-10-5R5G/7R5P-T4 | 5.5/7.5 | 7.5/10 | 15/20 | 13/17 |
KE300A-10-7R5G/011P-T4 | 7.5/11 | 10/15 | 20/26 | 17/25 |
KE300A-10-011G/015P-T4 | 11/15 | 15/20 | 26/35 | 25/32 |
KE300A-10-015G/018P-T4 | 15/18.5 | 20/25 | 35/38 | 32/37 |
KE300A-10-018G/022P-T4 | 18.5/22 | 25/30 | 38/46 | 37/45 |
KE300A-10-022G/030P-T4 | 22/30 | 30/40 | 46/62 | 45/60 |
KE300A-10-030G/037P-T4 | 30/37 | 40/50 | 62/76 | 60/75 |
KE300A-10-037G/045P-T4 | 37/45 | 50/60 | 76/90 | 75/90 |
KE300A-10-045G/055P-T4 | 45/55 | 60/75 | 92/113 | 90/110 |
KE300A-10-055G/075P-T4 | 55/75 | 75/100 | 112/157 | 110/150 |
KE300A-10-075G/090P-T4 | 75/90 | 100/125 | 157/180 | 150/176 |
KE300A-10-090G/110P-T4 | 90/110 | 125/150 | 180/214 | 176/210 |
RELATED_PRODUCTS
LEAVE_MSG
English 
français 
Español 
русский 
português 
العربية 
tiếng việt 
ไทย 
中文
Produits 
Application 
Engin de chantier
Machine textile
Info 
